Use
Hydraulic tensile testing machine is mainly used for the tensile, compression, bending, shear test of metal materials, adding simple accessories and devices, but also on wood, cement, concrete, rubber and its products for testing.
If the test machine is equipped with an environmental device, it can also do the tensile, compression and bending tests of materials under the environment.For example: high temperature tensile, low
temperature tensile, compression and other tests.
This machine is suitable for iron and steel, metallurgy, building materials, quality inspection center, water conservancy and hydropower, highway and bridge, scientific research institute, college mechanics and other factories and mining enterprises and testing and scientific research institutions.
The tightening mode is divided into hydraulic tightening and manual tightening.
Main Technical Performance Indicators
Max force（kN） | 600 |
Measure force range | 2%-100% |
Test force relative error value | ＜ The value for ±1% |
Test force resolution | Max load 1/300000 |
Deformation relative error value | ＜ The value for ±1% |
Deformation of the resolution | The biggest deformation 1/300000 |
The largest tensile test space（mm） | 600 |
Compression space（mm） | 500 |
The piston stroke(mm) | 200 |
Column spacing（mm） | 450 |
Circular specimen clamping range（mm） | Φ6-Φ40 |
The specimen thickness clamping（mm） | 0-30 |
Flat specimen clamping width（mm） | 75 |
The pressure plate size（mm） | φ160mm |
Bend the fulcrum maximum distance between two points（mm） | 300 |
Bending roll width（mm） | 140 |
The clamping way | Hydraulic clamping |
The host dimension（mm） | 840*620*2150 |
The oil source console size（mm） | 1100*750*1000 |
Motor total power（kW） | 2 |
Weight（kg） | 1900 |
