Rotary Abrasion Tester

Rotary abrasion tester is used to measure abrasion resistance of materials.
Wear test is used to evaluate the wear resistance of the product, such as measuring its mass loss, thickness loss and light transmittance.
Chat Now

Product Details


Rotary abrasion tester is used to measure abrasion resistance of materials.

Wear test is used to evaluate the wear resistance of the product, such as measuring its mass loss, thickness loss and light transmittance.


Application Object:

TABER abrasion tester used in flat products, such as: luggage, carpet, cardboard, clothes, glass, plastic coating, ceramic tile, metal coating, paint, varnish, decorative sheet, high voltage chip, plastics, textiles, elastic floor MATS, blankets, traffic paint, anodic oxidation layer, electronic components, decorating plate, wax, labels, holster, dental materials, car inner decorations, resin, furniture, etc. 


Features:

Rotary Abrasion Tester  unique abrasion process, the material to be tested on the rotary table, two grinding wheels with a certain weight on the material to make it wear.

The grinding wheel rotates with the rotating surface of the sample disc, producing relative motion and abrasion. In the process of rotation, the offset of the grinding wheel shaft relative to the rotating shaft of the disc produces slip motion, thus consuming the material.

When the sample with an area of 10x10cm is subjected to abrasion, the surface material of the sample is worn by full-angle particles or silk fabric to form a complete ring.

Simulate the real use condition or meet the standard test condition

- Various abrasion media and accessories can be selected for different tests

- Repeated tests can be carried out on the same point of a material, with a maximum thickness of about 0.5"

- Two speeds (60,72 RPM), four revolutions (100, 500, 1000 or 2500 RPM) and two loads can be set.(note 1)

 

Specification:

TABER abrasion tester technical parameters:

1. Specimen: inner diameter (D)3mm

2. Grinding wheel: 2 "(Max.45mm)(W)1/2" with: TABER America original import h-18 grinding wheel *1 pair

3. Wear wheel center distance: 63.5mm

4. The distance between the grinding wheel and the center of the disc: 37 ~ 38mm

5. Rotation speed: 60r/min

6. Load: 250,500,1000 g

7. Counter: LED 0 ~ 999,9999

8. Distance between test piece and suction port: 3mm

9. Volume: 45 35 42cm

10. Weight: 28kg (vacuum cleaner is optional)

11. Power supply: 1 AC 220V, 10A

 

Meet the standards: DIN53754, 53799531, 09523, 47, TAPPI T476, SATM D3884, ISO 54701

2345

3245

 


Inquiry