Melt Flow Index Testing Equipment

Discription:

Melt flow index testing equipment is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, petrochemical industry and related colleges and universities.

Standard: JIS-K6719-1/2、K6921-2、K6922-2、K6923-1、K6924-1、K6926-2、K7210、ASTM-D1238、ISO-1133

Test Methods: MFR +MVR Methods

Display Mode: English color touch screen display

Specification

1. Extrude the material

Discharging mouth diameter: Φ2.095 ± 0.005 mm,  discharging mouth length: 8.000±0.025 mm charging tube diameter: Φ 9.550±0.025 mm, the charging barrel length: 162±0.1 mm piston rod head diameter: 9.475 ±0.015 mm, the piston rod head length: 6.350 ± 0.100 mm;

2. Standard test load of full-automatic melting index instrument (total 8 grades of full set weights);

3. Temperature range: normal room temperature, 400 ℃ 500 ℃ (optional);

4. The constant temperature precision:± 0.2 ℃;

5. Utomatic meter display resolution: 0.1 ℃;

6. Cutting method: players can move or cut automatically;

7. Temperature recovery time: less than 4 minutes;

8. Power supply voltage: AC220V± 10% 50HZ.

ScheduleⅠ

ScheduleⅡ