Charpy Impact Test Equipment is controlled by single chip microcomputer, electric hammer release, liquid crystal display impact energy, each group of samples can do one to ten, the test can be arbitrarily cut data.Automatic calculation of the strength, the average strength.Automatic printing of data reports.
Scope of application
Charpy Impact Test Equipment can perform impact testing on hard plastics, fiber reinforced composites, glass fiber reinforced plastics, ceramics, asbestos and other non-metallic materials.
Applicable Standards:
JB/T8761, GB/T1043, ISO179, etc.
Technical Specification:
Model | A | B |
Impact Energy | 1J、2J、4J、5J | 7.5J、15J、25J、50J |
Impact Speed | 2.9m/s | 3.8m/s |
Pendulum Angle | 150° | 160° |
Distance From Center Of Pendulum To Center Of Sample | 230mm | 380mm |
Pendulum Torque | Pd1=0.5155N.m Pd2=1.0311N.m Pd5=2.5777N.m | Pd7.5=3.8662N.m |
Jaw Support Spacing | 40mm、60mm、70mm、95mm | |
Support Blade Fillet Radius | R=1mm | |
Angle Of Impact Blade | 30° | |
Impact Blade Fillet Radius | R=2mm | |
Accuracy Of Energy | 0.01J | 0.01J |