Benchtop xenon lamp aging test chamber is a small, simple and economical xenon lamp aging test box, it USES a small power air-cooled xenon lamp, through the mirror reflection system, to ensure that the irradiation energy in the work room is large enough and evenly distributed.It comes with a standard purple epitaxial filter, which allows ultraviolet light to pass below the cut-off point of natural sunlight (the equivalent of sunlight without the atmosphere) to provide faster and harsher test conditions for accelerated aging tests in artificial climates.
The operator can set various parameters needed for the test (irradiation energy, irradiation time, blackboard temperature, etc.) arbitrarily through the human-machine interface, and can check the running state of the machine at any time. The operating parameters during the test can be directly downloaded to the computer through the USB interface.
Benchtop xenon lamp aging test chamber
Main technical parameters:
light source: 1.8kw imported air cooled xenon lamp or 1.8kw domestic xenon lamp (normal service life is about 1500 hours)
filter: uv extension filter (daylight filter or window glass filter is also available)
effective exposure area: 1000cm2 (9 samples of 150×70mm can be put in one time)
irradiance monitoring method: 340nm or 420nm or 300nm ~ 400nm (optional before ordering)
irradiance setting range:
Domestic lamp tube: 30W/m2 ~ 100W/m2 (300nm ~ 400nm) or 0.3w /m2 ~ 0.8w /m2 (@ 340nm) or 0.5w /m2 ~ 1.5w /m2 (@ 420nm)
Imported lamp tube: 50W/m2 ~ 120W/m2 (300nm ~ 400nm) or 0.3w /m2 ~ 1.0w /m2 (@ 340nm) or 0.5w /m2 ~ 1.8w /m2 (@ 420nm)
setting range of blackboard temperature: room temperature +20℃ ~ 90℃ (depending on the ambient temperature and irradiation setting value)
inner/outer box material: all stainless steel 304/ spray
overall dimension: 950×530×530mm (length × width × height)
Net weight: 93Kg (including 130Kg packing cases)
power supply: 220V, 50Hz (customizable 60Hz);Maximum current 16A, maximum power 2.6kw