ISO 1519 Cylindrical Bending Tester

ISO 1519 Cylindrical Bending Tester

Cylindrical Bending Tester Use By bending the coated metal substrate under a set radius, it can obtain the ductility and adhesion of the paint film under the bending stress. The bending instrument is a simple and quick method to measure the elastic coating of the coating. Simply place the...
Chat Now

Product Details

Cylindrical Bending Tester

Use

By bending the coated metal substrate under a set radius, it can obtain the ductility and adhesion of the paint film under the bending stress.

The bending instrument is a simple and quick method to measure the elastic coating of the coating. Simply place the coating on the circular axis of the known diameter.

Then check the layers for cracks, peeling or other damage.

Made from anodic alumina

There are 12 stainless steel shaft bars

The test board can measure the width to 50mm

Axis rod diameter: 2, 3, 4, 5, 6, 7, 8, 10, 12, 20, 25, 32mm

Operate steps

Apply paint to metal substrate

Carefully coat the film and dry it to ensure good reproducibility

Experiment, firstly in 1 to 2 seconds the substrate bending test to 180 °

Start with the maximum diameter shaft rod and decrease the diameter test until you can see the coating fracture

Conform to the standard

GB/T 672-2007 paint and varnish bending test - cylinder axis

ISO 1519-2011

 

Technical Specification

Mandrel diameter

2mm-32mm

Outside size

170×110×230mm

Pack weight

7KGS

 

 

 

 


Inquiry