Building Paint Resistance Brush Wash Tester
The surface of the paint needs to be tested for resistance to scrubbing by brush or other means.Subjects included: interior wall paint, wallpaper, and carpet.
The experiment produces a small, controlled, and repeated destruction of the sample by wear or erosion to simulate use or wear.
The scrubber instrument can measure the properties related to scabbability and abrasion resistance of paint.Two brushes were used to accelerate the simulation of the "wear and tear" experiment.
The instrument conforms to GB/T 9755-2014 new standard for exterior wall coatings of synthetic resin emulsion.
Two brushes were connected to the bracket for parallel experiment
Air-cooled motor test is highly reliable
Peristaltic pump does not pollute the environment
A five-digit counter that automatically stops when it reaches the predetermined number
The brush can be adjusted to conform to DIN, ISO or ASTM test method comparison test
For comparative testing, use brushes, scrubbing pads, sponges, cleaning cloths, etc.
The scrubbing liquid solution placed in the container next to the instrument can be pumped to the brush. The pump can be switched on or off during the scrubbing experiment and the liquid flow can be precisely regulated.
Building Paint Resistance Brush Wash Tester
Technical parameters:
Wash speed | 37times/minutes |
Stroke length | 300mm |
Timer range | 1-99999 |
Water pump flow | Manual adjustable |
Out size | 580×480×300mm |
Machine weight | 32KGS |