ASTM D 3359 HGQ Cross Hatch Cutter

ASTM D 3359 HGQ Cross Hatch Cutter

ASTM D 3359 HGQ Cross Hatch Cutter Complies with BS 3900;E6, ASTM D 3359, BS/DIN EN ISO 2409. This cutter is used for determining the parallel groove adhesion of one or many coating layers on a substrate, generally a metal panel. Cutter are available in 2 different blade versions, one is a...
Chat Now

Product Details

ASTM D 3359 HGQ Cross Hatch Cutter

Complies with BS 3900;E6, ASTM D 3359, BS/DIN EN ISO 2409.

This cutter is used for determining the parallel groove adhesion of one or many coating layers on a substrate, generally a metal panel. Cutter are available in 2 different blade versions, one is a multi-cut blade with 6 cutting edges, another has one cutting edge. The Cross-Cut Tester blades are made of hardened steel alloy. The blades are designed for retaining a sharp cutting edge and reduce the frequency of blade replacement.

To choose a right cutter.

ASTM D 3359

requires

1 cutting edges

1 mm cutter

for films up to 50 µm thick

2 mm cutter

for films between 125 µm thick

ISO 2409

requires

6 cutting edges

1 mm cutter

0-60 µm,hard or soft substrates

2 mm cutter

61-120 µm,hard or soft substrates

3 mm cutter

121-250 µm,hard or soft substrates

 

Operation

When using the 1mm spacing with 6 tooth blades, with the knife edges downward, pull the tool over the painted surface being tested; scratching the coating to the bottom. A second crosswise cut (at an angle of 45° or 90°) will produce a ruled area comprising 25 squares or diamonds. Evaluate the appearance or behavior of the coat of paint after some vigorous strokes with the stiff brush provided, or scratching with a fingernail (partial or complete flaking or peeling, no change, etc.). Also note the condition of the substrate (sand-blasted, primed or with a prime coat, degreased, pickled, etc.).

Ordering.

Cat.No

Description

Standard

No.of Teeth

Cutting edges

26511

1mm

ASTM

11

1

26512

2mm

ASTM

11

1

26521

1mm

DIN/ISO

6

6

26522

1mm

DIN/ISO

11

6

26523

2mm

DIN/ISO

6

6

26524

2mm

DIN/ISO

11

6

26525

3mm

DIN/ISO

6

6


Inquiry