Lab Heat Sealer Technical Standards
The samples to be sealed were placed between the upper and lower thermal heads using the hot-press sealing method. The samples were sealed under the preset temperature, pressure and time. The thermal sealing tester met a variety of national and international standards: QB/T 2358, ASTM F2029, YBB 00122003.
Heat sealing tester type microcomputer control, LCD display, menu interface, PVC operation panel, digital P.I.D. control, temperature type double cylinder synchronous circuit, hand and foot two test model, heat sealing head up and down cover form independent temperature control, can be customized a variety of heat, aluminum sealing temperature heating tube, fast heating tube power connector plug type, pull RS232 interface, anti-scald safety design, can effectively ensure the convenience and security of the users.
Lab heal sealer is suitable for all kinds of plastic film, plastic composite film, paper plastic composite film, co-extrusion film, aluminum coating film, aluminum foil, aluminum foil composite film and other membrane material heat sealing test, the hot cover is smooth plane, the heat sealing width can be designed according to the user's needs, but also can be used for various plastic hose sealing experiments
Heat seal temperature
Temperature control accuracy
Heat sealing time
Heat sealing pressure
0.05 MPa～0.7 MPa
180 mm×10 mm（can customize）
0.5 MPa～0.7 MPa（Air source provided by user）
Ф6 mm Pu tube
400 mm (L)×280 mm (W)×380 mm (H)
AC 220V 50Hz