Printing Proofer For UV Ink Principle and features of automatic color crosser:
Simulates the structure of printing ink and the function of pressure adjustment
Suitable for lithography, color printing, UV printing ink characteristics, prepress adjustment of spot color LAB tolerance range.
Save printing machine spot color is not accurate, and then change the waste of time, directly improve efficiency.
Technical parameters
Dimensions: length 550x width 400x height 300mm weight: 70kg
Color paper specification: long 225 wide x190mm
Specification: length 200x width 35mm
Ink string pressure: one hole for each operating surface and driving surface, adjust with no.4 inner hexagon, clockwise to increase the pressure,
Reduce stress in reverse.
Adjustment pressure:
A small hole on the left and right side of the interface surface of the power cord
Pressure gauge 0000 printed 30c(250g grey card)
Pressure digital meter turns a digit 0.015mm
The pressure data table on both sides of the front of the electric connection is rotated to a single digit. The single digit is 0.015mm
Clockwise to increase pressure, and reverse to reduce pressure,
The figure below shows the pressure gauge and the adjustment pressure hole.
Operation step:
1.Adjust the pressure according to the thickness of the paper
2.Add ink to ink stick with quantitative instrument or small ink knife
3 press uniform ink 1(uniform time: 48 seconds) or press uniform ink (uniform time: 60 seconds)
4 uniform ink, and then press the color key color
5 cleaning ink stick can press (off/close) key to clean, clean with washing water cloth.(the steering of the two ink sticks is designed to turn outwards, and the cloth scraps should be wrapped properly. No cloth scraps can be exposed and it is safe to roll the cloth scraps.)
