Burning Chambers

Burning Chambers

Buring chamber is design by IEC60695-00 - IEC60695-2-2 -, and get all 00 (basic experiment method, the hot wire/hotline, glow wire test apparatus and common test procedure) and UL746A IEC829, DIN695, VDE0471.GBT5169.10 standards such as using the "flame light-off source program simulation test project.
Chat Now

Product Details

Purpose Of The Machine;

Buring chamber is design by IEC60695-00 - IEC60695-2-2 -, and get all 00 (basic experiment method, the hot wire/hotline, glow wire test apparatus and common test procedure) and UL746A IEC829, DIN695, VDE0471.GBT5169.10 standards such as using the "flame light-off source program simulation test project. Glow wire tester would stipulate material (4 ni80 / CR20) and the shape of the heating wire in large current heated to test temperature (550 ℃ -- 960 ℃) min, hot soup with the prescribed pressure (1.0 N) vertical try 30 s, inspect goods and bedding content to determine whether the light-off time finished the fire risk of electrical and electronic equipment, determination of solid insulating materials and its solid combustible material combustibility, light-off temperature (GWIT), flammable and combustible index (GWFI). The glow wire tester is applicable toLighting equipment, low-voltage electrical appliances, household appliances, machine tools, electrical machinery, electric tools, electronic instruments, electrical instruments, information technology equipment, electrical connectors and components such as electrical electrical products and components have research, production department, also applicable to insulation materials, engineering plastics or other solid combustible materials industry.


Main Technical Indicators

1. Glow-wire :4mm 0.04mm Ni/Cr (80/120) special standard ring, horizontal static

2. K type thermocouple: 0.5 mm, import insulation type high temperature with thermocouple, set of 1100 ℃ heat (1050 ℃) is superior to the standard

3. Hot wire electric heating temperature: 500 ℃ to 960 ℃ (display) can be preset, temperature fluctuations < 3 ℃

4. Glawing wire test pressure :1.0N 0.1N(adjustable)(better than standard 1.0N 0.2N)

5. Maximum ironing depth :7mm 0.5mm(adjustable)

6. Moving speed :10mm/s-25mm/s

7. Test time :30S 0.1s (1s-999.9s digital display can be preset)

8. Ignition matting board thickness: 10mm thick white pine board covered with 12G/ m2-30g /MM2 standard silk paper, away from glow-wire

Under the 200 mm ±5 mm

9. Test area volume: ≥0.5m3 background black, background illumination ≤20LX

11. Dimensions: width 1120mm* depth 520mm * height 1250mm, exhaust hole diameter 100mm

12. Power supply :1KVA 220V 50-60 HZ

13. Material: inside and outside stainless steel, paint treatment

 


Inquiry