Application of xenon arc test chamber:
Using xenon arc lamps which can simulate the whole sunlight spectrum to reproduce the destructive light waves in different environments can provide corresponding environmental simulation and accelerated test for scientific research, product development and quality control.
It can be used for the selection of new materials, improvement of existing materials or the change test of durability after the change of material composition. It can well simulate the change of materials exposed to sunlight under different environmental conditions.
Product functions:
A. Full spectrum xenon lamp.
B. Multiple alternative filtration systems.
C. Water spraying function.
D. relative humidity control.
E. Air temperature control system of test chamber.
F. Irregularly shaped sample holder.
G. Cheap and fine xenon arc lamps.
H. Features of easy installation, convenient use and basically no need for daily maintenance.
I. The service life of xenon arc lamps depends on the level of radiant illumination used, with the average lamp life of 1600 hours
At the right time.Convenient tube replacement, long - term filter to maintain the required spectrum to provide protection
Technical specifications :
Studio size : W * H * D 800 * 850 * 800 mm
Appearance size :W * H * D1350 * 1850 * 1250mm
Temperature: + 20 ℃ ~ + 80 ℃
Temperature deviation: ±3 ℃ (not open sun)
Humidity range: 30 ~ 95% R.H
Humidity deviation: ±5.0% r.h. (≥ 75%R.H) ±4.0% R.H. (moisture ≤75%R.H75% RH) or less (not open the sun)
Type of light source: imported water-cooled full-solar long-arc xenon lamp (average service life of about 1600 hours)
Rainfall time 1 ~ 9999 S/H, adjustable
Rainfall cycle 1 ~ 240 minutes, interval (break) adjustable
The spectral wavelength is 290nm ~ 800nm
Xenon lamp power 1CW, 3KW (life: 1600 hours)
Light source wavelength range: 290-800nm
Heating power: about 2.5kw
Humidification power: about 2.0kw
Irradiance of light source: 550-1200w/m2 (continuously adjustable);The energy compensation of xenon lamp is realized by adjusting voltage and current.
Irradiation area: about 7500cm2
Distance from arc center to sample stand: 350 ~ 380mm
Rotating basket speed: 1r/min(stepless speed regulation)
Spraying cycle:
Spraying time: 0 ~ 99h59min, continuously adjustable
Stopping time: 0 ~ 99h59min, continuously adjustable.
Light duration: continuously adjustable
Refrigeration mode: mechanical refrigeration air - cooled or compression unit.
Total power and power supply: about 7.5KW;380V ± 10% 10.0 A 50 hz
