Detailed description
Temperature humidity chamber can simulate various high and low temperature environments, and is suitable for testing the reliability and stability of electronic, automobile, rubber, plastic glue, metal and other products under various harsh environments (gjb150a3/4).Will provide you with the test and improvement of product quality and reliable basis.
Operation control system:
1. Controller: imported LED digital display P, I, D +S, S, R. Microcomputer integrated controller
2. The sensor: PT100 platinum resistance Ω/MV
3. Heating system: full independent system, nickel-chromium alloy electric heating heater
4. Refrigeration system: fully enclosed air-cooled single-stage compression refrigeration, original French "taikang" compressor, fully enclosed air-cooled superposition compression refrigeration
5. Circulation system: temperature and low noise air-conditioned motor, multi-blade centrifugal wind wheel
materials used in the high and low temperature alternating wet-heat comprehensive test box:
1. Material of outer box: high quality carbon steel plate
2. Inner box material: SUS304 stainless steel mirror plate
3. Insulation material: polyurethane rigid foam, ultra-fine glass fiber wool
4. Door frame insulation: double layer aging resistant silicon rubber door sealing strip
Model: LR-80g LR-150g LR-225g LR-408g LR-800g LR-010g
Using the environment request: 5 ~ 35 ℃, flat on the ground, well ventilated, no heat radiation.
Performance parameters of the temperature range: 0 ~ 130 ℃ \ - 20 ~ 40 ~ 130 ℃ 130 ℃ \ - \ 60 ~ 130 ℃ \ - 70 ~ 130 ℃ \ - 80 ~ 130 ℃ high temperature (150 ℃ optional)
Temperature:≤2.0 ℃
Temperature fluctuation:≤ 0.5 ℃
The temperature deviation:≤ 2.0 ℃
Humidity range 20% ~ 98%R.H
Humidity deviation :2%
The heating time at room temperature to 130 ℃ for 40 minutes
The cooling rate of 0.7 ~ 1 ℃ / min