Small Humidity Chamber

Small Humidity Chamber

Small humidity chamber is also called small constant temperature and humidity test box, mini constant temperature and humidity test box.The desk type constant temperature and humidity test chamber is the root
Chat Now

Product Details

Descripition

Small humidity chamber is also called small constant temperature and humidity test box, mini constant temperature and humidity test box.The desk type constant temperature and humidity test chamber is the root.

According to the international standard design and manufacture, widely used in aerospace, information, electronics, instrumentation, new materials, new energy and other industries for electrical products,

Accelerated wet-heat test of materials, parts, equipment, etc., alternating temperature heat test and constant wet-heat test chamber, in order to test the samples under specific environmental conditions performance evaluation.


Corresponding Standard

GB/ t10586-2006 technical conditions for wet heat test chamber

GB/ t10589-2008 low-temperature test chamber technical conditions

Technical conditions for high and low temperature test chamber

GB/ t2423.1-2001 test A method of low temperature test

GB/ t2423.2-2001 high-temperature test methods

GB/ t2423.22-2002 high and low temperature test methods

GB/ t2423.4-2008 alternating wet heat test method

Combined cycle test of temperature and humidity

GJB105.3-86 high temperature test

GJB105.4-86 low temperature test

GJB105.9-86 wet heat test

 

Production Specification

Model

LR-36R

LR-36L

LR-36S

Controller

Programmable key controller

Temp range

-20℃~+150℃

-40℃~+150℃

-60℃~+150℃

Humidity range 

30%RH~95%RH

Temperature  fluctuation 

±0.5℃

±0.6℃

±0.7℃

Humidity fluctuation

±2.5%RH

Uniformity of temperature distribution

±2.0℃

Uniformity of humidity distribution

±3%RH

Heating time

 -20℃~+150℃

 -40℃~+100℃

 -60℃~+150℃

65min

65min

70min

Cooling time

+20℃~-20℃

+20℃~-40℃

+20℃~-60℃

20min

50min

70min

Inner size(W*H*D)cm

350*350*300

350*350*300

350*350*300

Out size(W*H*D)cm

500*700*1100

500*700*1100

500*700*1100

Inner material

SUS 304

Out material

Steel plate coating

Heat preservation material

Rigid foam

Standard configuration

Air cooling/single stage compression/compound compression

Safety device 

Compressor overload protection switch, refrigerant high voltage protection switch, ceramic fuse, water shortage protection switch, electromagnetic switch, air burn protection

Standard configuration

Window, 2 pieces of upper and lower adjustable partition board, light inside the box

Power

 AC 220V/50Hz

图片1


Inquiry