Corrosion Resistance Test Chamber is for the surface treatment of various materials, include metal plating, hardware, electronic components, chemical coatings, paint, automobile, motorcycle, hardware fittings, screws, springs, magnetic materials, organic and inorganic membrane, anodizing, rust-proof oil industries such as quality inspection, test the corrosion resistance of their products.
internal size :W×D×H 1600×1000×500mm
Outer box size :W×D×H2215×1015×615mm
Corrosion Resistance Test Chamber
1. Temperature range: RT+10℃~55℃
2. Humidity range: ≥93%R.H
3. Temperature uniformity: ±2℃
4. Temperature fluctuation: ±0.5℃
5. Fog settlement: 1 ~ 2ml/80c㎡
6. Spray method: continuous/cycle optional
7. Test method:
Neutral salt spray test (NSS test), acetate spray test (ASS test), salt spray test (SS test)
Copper accelerated salt spray test (CASS test) and other salt spray test methods;
8. Sample rack: the sample rack can meet the inclination test of 15℃~30℃ (two layers);
9. Air compressor model: v-0.013/12.5 (customized) exhaust pressure: 1.25M volumetric flow: 0.13m3/min
Box making materials:
1. The salt spray test chamber is made of imported PVC reinforced hard plastic board, with smooth, clean and smooth surface, aging resistance and corrosion resistance;Avoid FRP materials
The all-plastic structure salt spray test chamber can better meet the requirement of long-term strong acid and strong salt spray test without any damage.
2. The cover of the box is made of fully transparent imported impact resistant plate, which is convenient to observe the test condition of the test sample during the test
Salt spray leakage;
1. The test temperature in the box is water jacket heating and humidification. The heater is equipped with advanced titanium alloy sheath and ni-cr alloy far-infrared heating core.
It heats up quickly and the temperature is evenly distributed.And compared with the glass fiber reinforced plastic box jacket type heating power saving about half.
This product meets GB2423.17 basic specification test Ka for electrical and electronic products, salt spray test method and GB10587, GJB150, DIN50021
Continuous salt spray and international standards;The test box of our company has passed the test of national environmental test equipment testing center.