ASTM G85-A5 Salt Spray Cycling Chamber

ASTM G85-A5 Salt Spray Cycling Chamber Meet the standards: GB/T5170.8, GB/T10587, GJB150.11, GB/T10125, GB/T2423.17, etc. DIN50021 DIN50017 DIN50907 ISO 11977 ISO 9227 ASTM B117 ASTM G85 automobile and other industrial specifications . 1.E xperim ental space: 900×600×500(W×D×H)mm other sizes can...

Product Details

ASTM G85-A5 Salt Spray Cycling Chamber

Meet the standards:

GB/T5170.8, GB/T10587, GJB150.11, GB/T10125, GB/T2423.17, etc.

DIN50021 DIN50017 DIN50907 ISO 11977 ISO 9227 ASTM B117

ASTM G85 automobile and other industrial specifications.

 

1.Experimental space: 900×600×500(W×D×H)mm other sizes can be customized

2.Outer space: according to the actual size

3. Power supply: 380V 6KW 50HZ MAX 30A

4. Materials:

(A) imported PVC board is adopted in the laboratory, which is acid and alkali resistant.

5, according to customer test requirements, can be set the salt dry and wet composite test

Salt spray test - moisture/Wet test

(A) brine spray laboratory: NSS, CASS

(1) laboratory: 10℃ ~ 50 ℃

(2) saturated air bucket: 47℃ ±1℃

(B) moisture test:

(1) temperature: 40℃ ±2℃

(2) humidity: more than 93%~100%

(2) saturated air bucket: 47℃ ±1℃

(C) drying test:

(1) temperature: 15℃~50℃ ±1℃

(2) humidity: over 30%

ASTM G85-A5 Salt Spray Cycling Chamber

6. Air supply system

The air pressure is 1kg/cm2, which can be adjusted in two stages. The first is the imported pressure regulating filter with the function of filtering water.

Adjust to 2-2.5kg/ cm2 roughly, the second is the imported precision pressure regulating valve, adjust to the pressure gauge 1kg/ cm2.

7. Spray method:

1. Apply bernouldt principle to take and absorb salt water and atomize it, the atomization degree is even, without blocking crystallization, to ensure the standard of continuous test.

2. Nozzle: made of special glass nozzle, the size and Angle of spray can be adjusted.

3. Spray volume: adjustable 1.5± 0.5ml 80cm2/Hr (16-hour average volume).

4. large brine storage tank, 48HR continuous spray.

8.Heating system:

External hot air heating method is adopted to reduce standby time and component damage rate.

S.S.R control heating power, accurate temperature, low power consumption.(titanium alloy corrosion prevention tube for electric heat pipe)ASTM G85-A5 Salt Spray Cycling Chamber


Function Introduction

Salt fog environment

Continuous salt spray exposure is widely used to test the corrosion resistance of components and coatings.Applications include industrial, maintenance, construction and Marine coatings;Plating and paint layers;Aviation and military coatings, surfaces and components, electrical and electronic systems and components.

Most of these tests, according to special specifications, are widely used in related corrosion tests and generally operate at higher temperatures, excluding the drying cycle.The required jet air should be heated before entering the nozzle.

During the salt spray function, this test chamber ACTS as a typical conventional salt spray operation.


Hot Tags: astm g85-a5 salt spray cycling chamber, China, manufacturers, suppliers, factory, cheap, price

Inquiry

You Might Also Like