Rain Test Equipment

Rain test equipment is suitable for electrical and electronic products (including the components), lamps and lanterns lighting products, automobile motorcycle parts shell and seals and other products to do test protection grade (IP waterproof level test), simulate its products during the transport and use can be affected by rain water
Chat Now

Product Details

Equipment introduction:

Rain test equipment is suitable for electrical and electronic products (including the components), lamps and lanterns lighting products, automobile motorcycle parts shell and seals and other products to do test protection grade (IP waterproof level test), simulate its products during the transport and use can be affected by rain water, splashing water in the rain condition test, test the shell after being in the rain or splashing water performance test are in good condition.

The equipment conforms to the international standard IEC60529, the national standard GB/ t4208-2008, the international standard iso20653-2013 and other inspection standards "casing protection level (IP code)", which is applicable to the waterproof test of products with the second characteristic number of IP level 3, 4, 5, 6, to meet the relevant test requirements of IP protection level.


Main technical parameters:

(I) IPX3, 4 pendulum pipe water test (as shown in the figure below) :

1. Spray pipe radius: 400mm (or as required);

2. Pipe diameter: Ф 16 mm;

3. Nozzle hole diameter: Ф 0.4 mm,

4. Aperture spacing: 50mm;

5. Arranging the swing: bilateral 60 °, 180 °;

6. Water pressure: 50 ~ 150Kpa;

8. Flow rate: 1.8l /min (or regulated according to the standard);

9. Test turntable size:Ф 600 mm ;

10. Test bed speed: 1 ~ 10r/min (adjustable);

11. Hydraulic pendulum rod speed: 1 ~ 15 r/min (adjustable), IPX3 unilateral 60 °, 120 °, back and forth 240 ° at the time should be 4 s;IPX4 unilateral 180 °, 360 °, back and forth to 12 s 720 ° at the time;

12. Material of test turntable: SUS#304 stainless steel; 

13. The box is made of SUS#304 stainless steel, with toughened glass door and imported frequency conversion governor.


Main configuration and material:

1. Control system: 7-inch color touch screen, double transparent flowmeter;

2. Water-spraying device: one set of IPX3 and 4 swing pipe devices,

3. Box body: 1.2mm thick SUS#304 stainless steel plate is used for the test box and flushing pipe;

4. Circulating water tank: 1.2mm thick SUS#304 stainless steel plate, water outlet, inlet one-way valve, high and low water level switch control;

5. Water pressure control system: aluminum alloy motor cycle pressurization, high pressure resistant PVC pipe;

6. Work table: thickening SUS#304 stainless steel circular rotary table (adjustable lifting), load less than 30kg;

7. The bottom of the box is equipped with fixed supporting feet and movable casters;

8. Safety protection system: no fuse protection switch, water shortage machine warning light indication;

9. Power supply: AC/380V, 50Hz.

 


Inquiry