Ozone test chamber can be used for rubber products such as rubber, thermoplastic rubber, cable insulation sheath, etc, under static or dynamic tensile deformation, exposed to the airtight no light contains a constant concentration of ozone in the air and constant temperature test chamber, according to the scheduled time to test the sample, the sample surface cracks or other performance changes, to assess resistance to ozone aging properties of rubber.
The equipment meets GB/ t7762-2003, GB/T13642, JISK6259, ASTM1149, ISO1431 and other test standards.
Amount of ozone in the atmosphere is small is the main factor of rubber cracking, ozone aging tank simulation and strengthen the ozone in the atmosphere conditions, studied the effect of ozone on rubber, rubber resistance to ozone aging fast identification and evaluation of performance and the antiozonant shielding efficiency of the method, and then take effective measures, the anti aging in order to improve the service life of rubber products.
(1) The unique balanced temperature-regulating and humidifying mode enables the equipment to have stable and balanced heating and humidifying capacity, and can be used for high and stable constant temperature and humidity control.
(2) The inner box is made of high-quality stainless steel plate, while the outer box is made of electrostatic plastic spray, with uniform color and elegant appearance. The sample shelf is also made of stainless steel, which is corrosion resistant and easy to clean.
(3) A test power inlet hole is provided to facilitate the energized test of the sample.
(4) For the temperature control part of the equipment, the touch screen temperature control meter is used to ensure high precision and stability.
(5) The device has the functions of over temperature protection, voice prompt and timing. When the timing is over, it will give an alarm and automatically cut off the power to stop the operation of the device to ensure the safety of the device and the person.
(6) The sealing strip of the equipment is made of silica gel material, with good toughness, and is not easy to be deformed or sticky under high temperature environment.
1. Gauge: 150 liters
2. Studio size: 500x500*600 (depth x width x height mm)
3. Temperature range: room temperature + 10 ℃ ~ 70 ℃
4. Temperature fluctuation degree, plus or minus 0.5 ℃ (light)
5. Temperature uniformity, plus or minus 2 ℃ (light)
6. Ozone concentration: adjustable range 20-1500 PPHM
7. Ozone concentration deviation range: 10% PPHM
8. Ozone air velocity: 12~16mm/s
9. Test time: 0 ~ 9999 hours
10. Stretching frequency: 0.5hz (adjustable, can be used for static and dynamic stretching)
11. Rotary table: 1-20r/min(adjustable)
12. The average speed of temperature: 2 ~ 3 ℃ / min (average, no-load)
13. Rated power: 2KW
14. Power supply: AC 2200Hz
16. The sample rack and test hole are fully equipped.
17. Material: cold rolled steel (plastic spraying) for the outer box, SUS304/ stainless steel for the inner box.
Why Choose Us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to
220V, insurance indicator.
2. Excellent After sale Service:
12 months warranty. Besides, we can help you to repair your problem controller freely, even
it's not from our factory. What you need to do is to send us the controller.
3. Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble
film before put them into the wooden case, which not only has good shock absorption, impact
resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture
corrosion, good transparency etc.