Digital compression tester adopts computer control, which are widely used in rubber, plastics, wire and cable, textiles, waterproof material, non-woven fabrics and other non-metallic materials and metal wire, metal foil, sheet metal and metal mechanical properties test, with special fixture is also suitable for all kinds of finished products tensile, compression, peel, cut, tear, bend test (passbook).Can print a number of data, according to different data to make graphic output comparison, high control accuracy, easy to operate;Modular design, a variety of accessories complete, flexible collocation.
The machine is mainly used for testing the mechanical properties of metals such as tension, compression, bending, etc.According to GB, JIS, ASTM, DIN and other standards can be automatically calculated tensile strength, yield strength, elongation, constant elongation stress, constant stress elongation, elastic modulus and other parameters.
A. Test standard modular function: provide the test Settings for the application required by user Settings, covering GB, ASTM, DIN, JIS, BS...And so on.Test standard specification.
B. Test data: provide all test data set by the user and input * for repeated use.The formula can be modified to improve the test data.
C. Double report editing: completely open users can edit the report for the tester to choose the preferred report format (the new built-in EXCEL report function in the test program expands the previous pattern of single professional report)
D. Each length, force unit and display digit shall be dynamically interchanged. The force units are T, Kg, N, KN, g and lb.
Units: mm, cm, inch.
E. The graph curve Scale is automatically zui optimized.And can be tested in real - time graphics dynamic switch.with
Load-displacement, load-time, displacement-time, stress-strain, load-2 point elongation diagram, and multi-curve comparison.
F.Test results can be output in EXCEL format.
G. the end of the test can be automatically archived, manual archive, testing is completed automatically calculate zui big strength, upper and lower yield strength, ring method, successive approximation method, extension strength, tensile strength, compressive strength, the strength of any focal point elongation, constant load extension, elastic modulus, elongation, stripping interval zui average value, value and small zui, net energy, total energy, bending modulus, breakpoint displacement x x % % load, breakpoint load on the displacement, and so on.
Backup: test data can be saved to any hard disk partition.
H. Multiple languages: simplified Chinese, traditional Chinese, English.
I. The software has the function of demonstrating historical test data.
1. Maximum test force: 100KN
2. Test machine grade: 1
3. Allowable error limit of the test force indicated: within 1% of the indicated value
4. Load measurement range: 2% ~ 100%FS of full range
5. Limit error of displacement indicator: within 1% of the indicator
6. Displacement resolution: 0.01mm
7. Adjustment range of displacement velocity: 0.01-500mm/min
8. Displacement rate control accuracy: within 0.5% of the set value when the rate is more than 1mm/min
9. Effective test width: 400mm
10. Effective stretching space distance: 0-700mm
11. Effective compression space distance: 0-700mm
12. Overall dimension (length * width * height) of the main machine: 760 * 530 * 1980 (mm)
13. Software and user interface: software and interactive man-machine dialogue operation interface under the operating environment of WINDOWSXP
14. The test process, display, analysis and control are completed by microcomputer
15. After the sample is damaged, the moving beam will automatically stop moving (or automatically return to the original position).
16. With program control and mechanical limit protection
17. When the load exceeds the rated value by 3-5%, the machine will stop automatically
18. Power supply: 220V, 50Hz, 1000W
19. Net weight of equipment: 480Kg