Compression Test Equipment

Compression test equipment adopts computer control, which are widely used in rubber, plastics, wire and cable, textiles, waterproof material, non-woven fabrics and other non-metallic materials and metal wire, metal foil, sheet metal and metal mechanical properties test, with special fixture is also suitable for all kinds of finished products tensile

Product Details

Use

Compression test equipment adopts computer control, which are widely used in rubber, plastics, wire and cable, textiles, waterproof material, non-woven fabrics and other non-metallic materials and metal wire, metal foil, sheet metal and metal mechanical properties test, with special fixture is also suitable for all kinds of finished products tensile, compression, peel, cut, tear, bend test (passbook).Can print a number of data, according to different data to make graphic output comparison, high control accuracy, easy to operate;Modular design, a variety of accessories complete, flexible collocation.

The machine is mainly used for testing the mechanical properties of metals such as tension, compression, bending, etc.According to GB, JIS, ASTM, DIN and other standards can be automatically calculated tensile strength, yield strength, elongation, constant elongation stress, constant stress elongation, elastic modulus and other parameters.

 

Technical Specification

Technical Parameters:

1. Product specification: WAW-50KN

2. Accuracy grade: 0.5

3. Maximum load: 50KN

4. Effective force range: 0.1/100-100%;

5. Test force resolution, maximum load 500000 yards;No internal or external file, and the overall resolution remains the same.

6. Effective test width: 600mm

7. Effective test space: 800mm

8. Test speed: 0.001~500mm/min(any adjustment)

9. Speed accuracy: within 0.5% of the indicated value;

10. Displacement measurement accuracy: within 0.5% of the indicated value;

11. Deformation measurement accuracy: within 0.5% of the indicated value;

12. Stress control rate range: 0.005% ~ 6% FS/S

13. Stress control rate accuracy: when the rate < 0.05% FS/S, it is within 1% of the set value;When the rate is greater than 0.05% FS/S, it is within 0.5% of the set value.

14. Strain control rate range: 0.002% ~ 6% FS/S

15. Strain control rate accuracy: when the rate < 0.05% FS/S, it is within 2% of the set value;When the rate is greater than 0.05% FS/S, it is within 0.5% of the set value.

16. Constant force/displacement/deformation measurement range: 0.5% ~ 100% FS

17. Constant force/displacement/deformation measurement accuracy: when the set value < 10% FS, it is within 1% of the set value;When the set value is greater than or equal to 10% FS, it shall be less than or equal to 0.1% of the set value.

18. Test bed lifting device: fast/slow two speed control, can move;

19. Test bench safety device: electronic limit protection

20. Test bench return: manual zui high speed return to the initial position of the test, automatic return after the end of the test;

21. Automatic stop at fixed time of test, automatic stop at fixed deformation of test and automatic stop at fixed load of test

22. Overload protection: automatic protection when the zui load exceeds 10%;

23. Automatic diagnosis function, regularly check the measurement system and drive system for overload, overvoltage, overcurrent, overload, etc., and protect them immediately if there is any abnormal situation

24. Power: 1500W

25. Weight of main engine: 850kg

26. Power supply voltage: 220V (single phase)

27. Host size: 1000*520*1860mm

Rubber-Plastic-Steel-Competitive-price-Strength-ServoUniversal-Material-Tensile-Strength-Testing-Machine

Best-selling-fabric-ISO13937-ISO4606-ASTM-D5034 (1)

Hot Tags: compression test equipment, China, manufacturers, suppliers, factory, cheap, price

Inquiry

You Might Also Like